Products: Pin Cutters
We tested several products before choosing these fine German-made cutters.
They provide very accurate, burr-free cutting of the hard-temper stainless steel pins used in MicroMounts™, MicroMeshes™ and MicroTools™.
These cutters are manufactured in chrome-vanadium steel. They are oil hardened and the cutting edges are separately induction hardened.
The end cutting action and almost flush head allows accurate alignment and cutting on the 2 mm marks on our pins.
Because the edges of these cutters are extra-hard, they are also more brittle. To get maximum tool life, please follow two simple rules:
1. Always cut with the steel pin perpendicular to the jaws.
2. Never wiggle the pin or cutters during cutting.
|WARNING : Always wear safety glasses whenever using any pin cutters.|
Order Pin Cutters
High quality end cutters for cutting hard/spring temper pins and rods. Provide accurate, burr-free cutting of MicroMount and MicroMesh pins.
If you prefer not to order online, click here for a printable fill-in order form.