Digital Corrosion Resistant Programmable Stirring Hot Plates

Digital Corrosion Resistant Programmable Stirring Hot Plates by Torrey Pines Scientific. Designed for corrosive environments where other stirring hot plates would be destroyed quickly by vapors or spills. It can be purged using an inert gas, such as lab air, through a fitting on the rear of the unit. Purging provides a positive gas pressure inside the unit to prevent corrosive gases from entering the chassis.

In manual operation, simply select the parameter to be set and scroll to the value needed. The unit will do the rest. In the programmable mode, routines can be stored for instant recall and use. The stored routine will run automatically, without attention, and exactly the same time after time.

Programs can be simple or complex depending upon the need. Multiple temperatures, temperature ramp rates, stirring speeds and timed events can be stored. When run, the unit monitors the program to be sure it runs exactly as written. Complete walk-away automation.

The HS70 is supplied with a corrosion resistant 6″ ptfe immersion probe.

Learn More About These Hot Plates

$2,200.00

SKU: TPS-HS70 Category:

Product Information

EchoTherm™ Model HS70 Corrosion-Resistant Fully Programmable Digital Stirring Hot Plates are the most advanced and easy-to-use units available. They are designed with a purge port for infusing an inert gas, such as lab air, into the chassis of the unit. This positive pressure inside the chassis causes the gas to flow out of any openings and prevents corrosive gasses form entering the chassis, improving unit life greatly. In manual operation, simply select the parameter to be set and scroll to the value needed. The unit will do the rest. In the programmable mode, routines can be stored for instant recall and use. The stored routine will run automatically, without attention, and exactly the same time after time. Programs can be simple or complex depending upon the need. Multiple temperatures, temperature ramp rates, stirring speeds and timed events can be stored. When run, the unit monitors the program to be sure it runs exactly as written. Complete walk-away automation.