Several Pin Cutters were tested before choosing these German-made cutters. They provide accurate, burr-free cutting of the hard-temper stainless steel pins used in MicroMounts™, MicroMeshes™ and MicroTools™.
They provide very accurate, burr-free cutting of the hard-temper stainless steel pins used in MicroMounts™, MicroMeshes™ and MicroTools™.
These cutters are manufactured in chrome-vanadium steel. They are oil hardened and the cutting edges are separately induction hardened.
The end cutting action and almost flush head allows accurate alignment and cutting on the 2 mm marks on our pins.
Because the edges of these cutters are extra-hard, they are also more brittle. To get maximum tool life, please follow two simple rules:
1. Always cut with the steel pin perpendicular to the jaws.
2. Never wiggle the pin or cutters during cutting.
You may also like…
Crystal Mounts and LoopsSimplify crystal harvesting, and obtain the best possible data from your crystals, using the most advanced...