BEAMLINE GUIDE
CAMD GCPCC


Center for Advanced Microstructures and Devices
Baton Rouge, Louisiana

The GCPCC beamline is located at the Center for Advanced Microstructures and Devices (CAMD), which is operated by Louisiana State University. The CAMD synchrotron is a second-generation source that is currently operated at 1.3 GeV with an injection current of 200 mA and 2 fills per day. The GCPCC beamline utilizes 1.5 mrad of the output of a 11 pole 7.5 Tesla superconducting wiggler. The x-rays are collimated vertically by a fixed radius cylindrical mirror, monochromatized by either a channel-cut monochromator or a multilayer monochromator and focused by a toroidal mirror with an adjustable major radius. The channel-cut monochromator is designed for MAD data collection and has a Si crystal in the 111 orientation. 1

The end station is equipped with a MAR dtb goniostat and a Rayonics 165 mm dia. CCD. At present there is no crystal mounting robot. The dtb goniostat can accommodate pins of any reasonable length.


Contacts

Henry Bellamy

Robert Fox


Tools

We recommend the following tools for their compatibility and ease-of-use.

Recommended Accepted*
Puck Style N/A
Mount/Loop Style Any
Rod Length 11 mm, 18mm/SPINE, 19 mm, 25 mm
Base Style B1A-ReusableB1-ReusableB3-Reusable, B3S-ReusableB5-Reusable
 *Robotic Sample Handling, Aina Cohen. Retrieved November 11, 2013.

Sample Preparation Kits

Convenient kits of compatible assemblies of MiTeGen recommended products

Beamline Sample Preparation Kits are available in 3 aperture size assortments based on your crystal sizes and include:

  • Assemblies of 100 Crystal Mounts, on 18 mm pins, available in the following assortment:
    • 20 x Dual-Thickness MicroLoops ™ LD  (5 each of 10, 20, 30 and 50 μm aperture sizes)
    • 40 x Dual-Thickness MicroMount ™ (10 each of 75, 100, 150 and 200 μm aperture sizes)
    • 20 x Dual-Thickness MicroLoops ™  (5 each of 300, 400, 500 and 600 μm aperture sizes)
    • 20 x MicroMeshes ™  (5 each of 10, 25, 50 and 25L μm aperture sizes)
  • Installed in 100 B5-R reusable bases or 100 regular bases
  • Packaged and stored in 5 MiTeGen base holders

Uni-puck Starter Kit 2 includes:

  • (7) Universal V-1 Pucks
  • (1) Double Puck Loading Dewar with Lid
  • (1) Puck Wand
  • (1) Puck Dewar Loading Tool
  • (1) Puck Separator Tools
  • (1) Shelved Puck Shipping Cane
  • (1) Bent Cryo-Tong
  • (1) Cryo Express Dry Shipper (CX100)
  • (1) Shipping case for CX100

*custom kits are available, contact MiTeGen with specific requests.


Order Beamline Kits